Quick Answer: What MERV Rating Should I Use In My Home?

Can I use a MERV 13 filter in my furnace?

The ideal MERV filters for both air filtering and furnace efficiency are 7-13, experts say.

These filters can be used without any modifications to your equipment.

Higher rated filters allow less air to flow through though and can force your furnace to work harder and possibly malfunction..

What MERV rating can my furnace handle?

The ideal MERV filters for both air filtering and furnace efficiency are 7-13, experts say. These filters can be used without any modifications to your equipment. Your system may handle MERV 14-16 with no discernable stress. However, many residential systems require modifications to pull air through these filters.

Is MERV 8 good enough?

MERV 5–8 (good): These filters are better at catching small particles (3–10 microns) like mold spores, hair spray, dust mites and animal dander. MERV 9–12 (better): The best option for residential use. … Particles this small include bacteria, tobacco smoke and even the contaminants in sneezes.

Is MERV 13 bad for HVAC?

Wrong. While the highest MERV ratings are the most effective for air quality, they can harm your HVAC system. A higher MERV rating means a higher resistance, which means less airflow….Learn how to maintain your. home and HVAC this fall.MERVMinimum Particle Size13–161.0–0.3 μm17–20< 0.3 μm3 more rows•Sep 20, 2019

What MERV rating is filtrete 1500?

3M Filtrete 1″ Air Filters Comparison Chart:Basic DustUltra AllergenAvailable in:9 sizes30 sizes* MPR Rating:3001500MERV Rating:512** Efficiency:34%90%5 more rows

How do I know what MERV filter to use?

MERV ratings range from 1 to 20, with lower ratings denoting a lower-quality filter.MERV 1-4 Filters: Filters with a MERV rating of 1 to 4 do little to trap harmful particles in your home’s air. … MERV 5-8 Filters: MERV ratings of 5 to 8 indicate a medium-quality filter that’s sufficient for most homes.More items…•

Is MERV 11 bad for HVAC?

Most modern HVAC systems have no problem working with higher MERV filters. If your home has a very old HVAC system, or you use a higher MERV filter and never change it, you could run into airflow problems, but under normal circumstances, you won’t be stressing out your HVAC system that much with a higher MERV filter.

How often should you change a MERV 13 filter?

every 30 daysIf you want good indoor air quality (IAQ), you need better filtration and that means a MERV-13 filter. But high-MERV filters also happen to be more expensive so changing them every 30 days is not the so good for your pocketbook. The good news with high-MERV filters, though, is that they usually hold more dirt.

How long does a MERV 8 filter last?

three to six monthsAnother factor driving the popularity of MERV 8 filters is that they are inexpensive and easily serviced. Depending on the manufacturer they can last three to six months and even up to a year in residential use.

Is MERV 10 good enough?

A filter with a MERV rating of around 10 to 12 is sufficient to remove most allergy-causing particles from your home’s air.

Does MERV 11 restrict airflow?

Be aware, too, that some retailers also use their own rating system instead of MERV. A decade ago, it used to be that if you had an HVAC system that used panel filters rated 6 through 9 MERV, putting in a MERV 11 or higher filter would restrict airflow (known as filter pressure drop).

Is MERV 13 better than MERV 11?

For most household uses, the highest MERV rating used will be MERV 13 filters. … “The MERV 11 air filters remove a higher percentage of contaminants in the air that will increase indoor air quality and maintain the efficiency of the HVAC unit.

Is MERV 13 too restrictive?

In some cases, using an air filter that is too restrictive for your system may cause low air flow problems as well. MERV 13 is the highest MERV value safe for residential furnaces; the higher ratings are used primarily in commercial units. … ASHRAE recommends MERV 6 or higher.

What is the best air filter for your home?

So here is my list of The 10 Best Furnace Filters.AIRx Health 1″ MERV 13 Furnace Filters. … Honeywell FC100A1037 Ultra Efficiency 4″ Furnace Filters. … Nordic Pure 4″ Furnace Filters. … FilterBuy 1″ Furnace Filters. … AIRx ALLERGY 1″ Furnace Filters. … Filtrete Micro Allergen 4″ Furnace Filters. … X6673 Lennox 4″ Furnace Filters. … Filtrete Clean Living 1″ Furnace Filters.More items…•

How often should you change Merv 8 filters?

every 3-4 monthsThe basic recommendation for furnace filters replacement is every 3-4 months for MERV 8, every 6 months MERV 10 and 11 and every year for MERV 16.