Is MERV 13 Too Restrictive?

Is MERV 13 too high?

Filters within a MERV rating of 17-20 are almost never necessary in a residential home.

A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that..

What is the lowest MERV rating?

MERV 6MERV 6 is the lowest MERV rating offered by AirFilters.com. Though not recommended for allergy and asthma sufferers, filters with a MERV 6 rating are 8 times more efficient than the regular cheap fiberglass filters.

Does MERV 13 restrict air flow?

The short answer is that it can, but it’s not really an issue except under extreme circumstances. Most modern HVAC systems have no problem working with higher MERV filters.

Is MERV 11 too restrictive?

MERV 11 are approximately the same. A MERV 11 would be considered an “allergy” filter that does a good job of removing particles in all size ranges. … Most of the thicker filters are sold as a MERV 11 or higher, but they are also available in a MERV 7 or MERV 8.

Are MERV 13 filters bad for HVAC?

Here’s the problem: Some filters with a high MERV rating can drop air pressure in your duct system, which can increase energy bills and damage your HVAC system. For example, let’s say you have a pleated filter that’s 1-inch thick and has a 13 MERV rating. … And like we said before: low airflow = wasting energy.

How often should you change a MERV 13 filter?

every 30 daysIf you want good indoor air quality (IAQ), you need better filtration and that means a MERV-13 filter. But high-MERV filters also happen to be more expensive so changing them every 30 days is not the so good for your pocketbook. The good news with high-MERV filters, though, is that they usually hold more dirt.

How often should you change a MERV 11 filter?

every 30 daysThe filter you choose determines how often you need to change it. We recommend that most homeowners buy a mid-level MERV 10 or 11 filter and change that filter every 30 days — for better air quality and energy bill savings.

Is MERV 8 good enough?

MERV 5–8 (good): These filters are better at catching small particles (3–10 microns) like mold spores, hair spray, dust mites and animal dander. MERV 9–12 (better): The best option for residential use. … Particles this small include bacteria, tobacco smoke and even the contaminants in sneezes.

Are Filtrete filters too restrictive?

Typically, any filter with a MERV rating higher than 12 (or equivalently MPR 1500 in the case of 3M Filtrete filters) is too restrictive for most residential air conditioning systems; they are typically designed for commercial HVAC systems.

Do I need both a furnace filter and a return air grill filter?

While many people refer to air conditioning and furnace filters as if they’re different, this is not the case. Your furnace and your air conditioning system use the exact same filter, so there’s no need to worry about purchasing separate filters for each piece of equipment.

What MERV rating should I get for home?

8As a general rule, residences do not use higher than MERV 8 filters. We do recommend that everyone uses filters that have at least an 8 MERV rating. These filters will remove the majority of pollutants from your indoor air.

Is a 2 inch filter better than a 1 inch?

1″ filters suck. They block a lot of air flow. 2 inch is the smallest I put in, and 4″ is optimal. Sure it filters, but it doesn’t have enough surface area to allow the airflow a system needs.

Can I use a MERV 13 filter in my furnace?

The ideal MERV filters for both air filtering and furnace efficiency are 7-13, experts say. These filters can be used without any modifications to your equipment. Your system may handle MERV 14-16 with no discernable stress.

Is MERV 11 or 13 better?

For most household uses, the highest MERV rating used will be MERV 13 filters. … “The MERV 11 air filters remove a higher percentage of contaminants in the air that will increase indoor air quality and maintain the efficiency of the HVAC unit.